close

Hood

Product priceConsultation required
Product information전술차량 앞부분의 엔진 부위 덮개이며 방음 및 야전시 발판 기능의 부품
TAG#Military vehicle #Small tactical vehicle # military communication vehicle
#HOOD #RTM #KiaAutomobile
Product packaging and Shipping conditionsPackaging & Shipping
50kgs/Pallet

Contacts

김태승
010-3644-1584
boss54321@idongsung.com

Contact supplier

Related Products

적용차종

KMC : 소형전술차

Product Description

RTM molding(Resin transfer molding)

  • RTM molding is a method of laminating a fabric into a press mold, closing the upper mold, then injecting the resin.
  • Because the molding method involves the resin pushing through the void space, it can be expected to produce the product property of vacuum molding, and mass-production is possible because of its good workability.

Test item Test method Unit Category Test result Requirements
Chemical resistance MS 655-08 : 5th 1 Chemical Exterior Color change and degradation
gasoline No color change, discoloration, swelling, cracks, exposure of substrate etc. on gasoline coating film 4-5 There should be no color change, discoloration, swelling, cracks, exposure of substrate etc. on the film Gray scale(Grade 3 or more)
Polish wax 4-5
Glassdetergent 4-5
Ethyl alcohol 4-5
Acetone 4-5
Gloss MS 655-08 : 5th 1 86.1
Water resistance MS 655-08 : 5th 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive M-1.0
Color difference(

(△E*)

0.46
Gray scale(Grade) 4-5
Scratch resistance MS 655-08 : 5th Grade 1 4 3.5 or more
Moisture resistance MS 655-08 : 5th 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, and adhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive M-1.0
Color difference

(△E*)

0.51
Gray scale(Grade) 4-5
Exterior No color change, discoloration, swelling, cracks, exposure of substrate etc. on the film There should be no color change, No color change, discoloration, swelling, cracks, exposure of substrate etc. on the film There should be no color change, discoloration, swelling, cracks, exposure of substrate etc. on the film Gray scale(Grade 3 or more)
Alkali resistance MS 655-08 : 5th 1 Gray scale(Grade) 4-5
Salt Spray Resistance MS 655-08 : 5th 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive(Grade) M-1.0
Color difference

(△E*)

0.18
Gray scale(Grade) 4-5
Pencil Hardness MS 655-08 : 5th 1 H or more HB or more

< Material report >SampleName: Resin for FRP[G-689S(Y)(UP-G)]

Test item Unit Sample Category Results Test method
No abnormality on exterior No abnormality KS M 3305 : 2009
Density g/mL 1.116 KS M 3305 : 2009
Acid value (part acid value) KOH 24.3 KS M 3305 : 2009
mg/g
Viscosity(25 ± 1)℃) mPa.s 314 KS M 3305 : 2009(*)
room temperature gelling time min 17.9 KS M 3305 : 2009(**)

* Bookfield Viscometer, LV2, 30 r/min / ** Mixing ratio = main material : hardener = 100 : 1 (volume ratio)

Supply Ability

  • Process : Hand Lay-up → Sanding → Painting → Assembly
  • Lead Time : 3days

Packing & Delivery

  • Packaging Details : 50kgs