| Test item | 
Test method | 
Unit | 
Category | 
Test result | 
Requirements | 
| Heat Cycle Resistance | 
MS 210-05 : 15th | 
– | 
1 | 
No torsion, deformation, discoloration, cracks, fine cracks, peeling, significant change in hardness, stickiness that can be confirmed with the naked eye. | 
There should be no torsion, deformation, discoloration, fine cracks, peeling, and significant hardness change or stickiness. | 
| Light resistance | 
MS 210-05 : 15th | 
– | 
1 | 
Exterior: No discoloration or change of color confirmable by the naked eye
 Color difference(△E*): 0.4 
Color change and degradation(Grade) : 4  | 
There must be no discoloration or change of color visible to the naked eye. / Gray Scale: Grade 3 or more △E*: 2 or less | 
| Chemical resistance | 
MS 210-05 : 15th | 
– | 
1 | 
그라이스 | 
Color change and degradation(Grade) M4-5 | 
No visible discoloration, peeling, cracking, swelling etc. | 
There should be no discoloration, peeling, cracking, swelling etc./ Gray Scale: 3 or more | 
| Adhesive | 
Color change and degradation(Grade) M4-5 | 
| Color difference(△E*) | 
Color change and degradation(Grade) M4-5 | 
| Wear resistance | 
MS 210-05 : 15th | 
Grade | 
1 | 
4 | 
3 or more | 
| Layer adhesion | 
MS 256-29 : 9th | 
N/m | 
1 | 
Skin to foam : 199.2 | 
With no parts being 88 or less, for 175 or more or the overall surface, the foam particles must be removed while being attached on SKIN. | 
| Heavy metal content | 
MS 201-02 : 31th | 
mg/kg | 
1 | 
Cd : not detected
 Pb : not detected 
CrVI : not detected 
Hg : not detected  | 
100 ppm
 1000 ppm 
1000 ppm 
1000 ppm  | 
| * not detected : Below detection limit
 * Detection limit : ① Cd : 5 mg/kg ② Pb : 10mg/kg ③ CrVI : 2mg/kg ④ Hg : 1mg/kg  | 
| Scratch resistance | 
MS 655-08 : 5th | 
Grade | 
1 | 
4 | 
3.5or more | 
| Adhesive | 
MS 655-08 : 5th | 
– | 
1 | 
M-1.0 | 
M-1.0	Must be within M-1.0~M-2.5 | 
| Shock resistance | 
MS 655-08 : 5th | 
– | 
1 | 
room temperature | 
No cracking or peeling on the coating film	/td>
 |  | 
A minute cracking on coating film exists but there should be no peeling | 
| Moisture resistance | 
MS 655-08 : 5th | 
– | 
1 | 
Exterior | 
No discoloration, change of color, cracking, gloss degradation on the coating film | 
 | 
There is no change of color, discoloration, swelling, cracking on coating film, and reduction in gloss,, and adhesiveness is within M-1.0 ~ M-2.5
 Color difference(△E*) : 2.0 or less / Gray scale(Grade: Grade 3 or more  | 
| Adhesive | 
M-1.0 | 
 | 
| Color difference(△E*) | 
0.27 | 
 | 
| Gray scale(Grade) | 
April 5th | 
 | 
| Odor | 
MS 300-34 : 12th | 
Grade | 
2 | 
Wet type : 3.0 dry-type : 3.0 | 
1~3 etc.Grade |