close

Grill

Product priceConsultation required
Product information주행시 외부공기 유입을 통해 냉각수 및 엔진열을 식히는 역할 및 파편으로부터 내부를 보호하는 역할을 하는 부품
TAG#Xient #largetruck #Hyundai Automobile #Hyundai truck
#Hyundai Commercial vehicle
#Grill #metalic paint #clear paint
Product packaging and Shipping conditionsPackaging & Shipping
20kgs/Pallet or Carton Box

Contact Supplier

Contacts

김태승
010-3644-1584
boss54321@idongsung.com

Contact supplier

Related Products

Guard-1

Guard

운전석 및 탑승자를 보호하는 기능의 부품
Rear-Bumper

Rear Bumper

차량 후미에 부착되어 충돌 시 충격흡수를 하기 위한 부품
Hood

Hood

전술차량 앞부분의 엔진 부위 덮개이며 방음 및 야전시 발판 기능의 부품
Universe-Under-Cover

Under Cover

차량 하부에 부착되어 운행시 지면의 이물질로부터 차체를 보호하는 기능의 부품

적용차종

HMC : UNIVERSE

KMC : GRANBIRD

HMC : XCIENT

Product Description

SMC material

  • SMC material has excellent thermal vulcanizing ability, excellent strength, and electrical insulation characteristics.
  • Seat SMC is a press molding material on a sheet with excellent moldability by impregnating unsaturated polyester resin with reinforcing material, filler, mold release agent, pigment, catalyst etc. and increasing viscosity by chemical. Thus, SMC can be adjusted according to the desired physical properties of the product because its change range of strength and various physical properties is wide according to the impregnation and arrangement of glass, which is a reinforcing material, and the filler.

Test item Test method Unit Category Test result Requirements
Gloss MS 655-08 : 5th – 1 88.4 –
Water resistance MS 655-08 : 5차 – 1 Exterior No discoloration, change of color, cracking, gloss degradation on the coating film No discoloration, change of color, cracking,
gloss degradation, on the coating film,
andAdhesive is M-1, 0 ~
Within M~2.5 Color difference(△E*) : 2.0 or less /
Gray scale(Grade) : Grade 3 or more
Adhesive(Grade) M-1.0
Color difference(△E*) 0.47
Gray scale(Grade) 4-5
Scratch resistance MS 655-08 : 5th Grade 1 4 3.5 or more
Moisture resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation on the coating film No discoloration, change of color, cracking,
gloss degradation, on the coating film,
andAdhesive is M-1, 0 ~
Within M~2.5 /
Color difference(△E*) : 2.0 or less /
Gray scale(grade) : Grade 3 or more
Adhesive(Grade) M-1.0
Color difference(△E*) 0.42
Gray scale(Grade) 4-5
Alkali resistance MS 655-08 : 5차 – 1 Exterior No discoloration, change of color, cracking, gloss degradation on the coating film There should be no discoloration, change of color, cracking,
gloss degradation, and substrate exposure on the coating film /
Gray scale(grade) : Grade 3 or more
Gray scale(Grade) 4-5
Salt Spray Resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation on the coating film No discoloration, change of color, cracking,
gloss degradation on the coating film,
and Adhesive is M-1, 0 ~
Within M~2.5 /
Color difference(△E*) : 2.0 or less /
Gray scale(grade) : Grade 3 or more
Adhesive(Grade) M-1.0
Color difference(△E*) 0.29
Gray scale(Grade) 4-5
PencilHardness MS 655-08 : 5th – 1 H or more HB or more

< Material report >

Test item Unit SampleCategory Results Test method
Loss ignition % – 29.6 ASTM D2584-11
Specific Gravity((23/23)℃) – – 1.88 ASTM D792-13(A Method))
Tensile strength MPa – 111 ASTM D638-14(*)
Flexural strength MPa – 208 ASTM D790-17(**)
Flexural modulus of elasticity GPa – 10.5 ASTM D790-17(**)
Izod Impact Strength J/m – 1.203(P) ASTM D256-10e1(A Method)
Izod Impact Strength(~40℃) J/m – 1.484(P) ASTM D256-10e1(A Method)(***)
Load deformation temperature(1.82MPa) ℃ – Not measurable(****) ASTM D648-16(B Method)
Absorption rate (24h Immersion) % – 0.47 ASTM D570-98(2010)e1

* Test speed: 5 mm/min, Test surface: Type I / ** Test speed : 1.4 mm/min, Distance Between Supports : 50 mm / *** Status control : (-40 ±2) ℃ X 30 min / **** Specified deformation (0.25 mm) does not occur up to maximum temperature of equipment (300 ° C)

Supply Ability

  • Process: 800T/ 1000T/ 2500T PRESS -> Sanding -> Painting -> Assembly
  • Lead Time : 3 days

Packing & Delivery

  • Packaging Details : 20kgs
  • Lead Time : 3 days
Engine Cover Engine-Cover 80_1-1 Rail Skirt