close

Door

Product priceConsultation required
Product information승하차시 운전석 및 동승석의 출입문이자 차량탑승자를 외부로부터 보호하는 역할을 하는 부품
TAG#Military vehicle #Small tactical vehicle # military communication vehicle #Door #RTM #KiaAutomobile #Bulletproof panel
Product packaging and Shipping conditions Packaging & Shipping
30kgs/Pallet

Contact Supplier

Contacts

김태승
010-3644-1584
boss54321@idongsung.com

Contact supplier

Related Products

Rear-Bumper

Rear Bumper

차량 후미에 부착되어 충돌 시 충격흡수를 하기 위한 부품
Hood

Hood

전술차량 앞부분의 엔진 부위 덮개이며 방음 및 야전시 발판 기능의 부품
Gab-Bar-2

Grab bar

버스 승하차 시 안전 및 편의제공를 위한 부품
Engine-Cover

Engine Cover

엔진 內 외부이물질 유입을 방지하고, 엔진내부에서 발생하는 열을 차단하는 기능을 하는 부품

적용차종

KMC : 소형전술차

Product Description

RTM molding(Resin transfer molding)

  • RTM molding is a method of laminating a fabric into a press mold, closing the upper mold, then injecting the resin.
  • Because the molding method involves the resin pushing through the void space, it can be expected to produce the product property of vacuum molding, and mass-production is possible because of its good workability.

Test item Test method Unit Category Test result Requirements
Chemical resistance MS 655-08 : 5th – 1 Chemical Exterior Color change and degradation
Gasoline No color change, discoloration, swelling, cracks, exposure of substrate etc. on gasoline coating film 4-5 There should be no color change, discoloration, swelling, cracks, exposure of substrate etc. on the film Gray scale(Grade 3 or more)
Polish wax 4-5
Glass detergent 4-5
Ethyl alcohol 4-5
Acetone 4-5
Gloss MS 655-08 : 5th – 1 86.1 –
Water resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive M-1.0
Color difference

(△E*)

 0.46
Gray scale(Grade) 4-5
Scratch resistance MS 655-08 : 5th Grade 1 4 3.5 or more
Moisture resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film o discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive M-1.0
Color difference

(△E*)

 0.51
Gray scale(Grade) 4-5
Exterior No color change, discoloration, swelling, cracks, exposure of substrate etc. on the film There should be no color change, discoloration, swelling, cracks, exposure of substrate etc. on the film Gray scale(Grade 3 or more)
Alkali resistance MS 655-08 : 5th – 1 Gray scale(Grade) 4-5
Salt Spray Resistance MS 655-08 : 5th – 1 Exterior No discoloration, change of color, cracking, gloss degradation, on the coating film No discoloration, change of color, cracking, gloss degradation, on the coating film, andAdhesive is M-1, 0 ~ Within M~2.5 / Color difference(△E*) : 2.0 or less / Gray scale(Grade 3 or more)
Adhesive(Grade) M-1.0
Color difference

(△E*)

 0.18
Gray scale(Grade) 4-5
Pencil Hardness MS 655-08 : 5th – 1 H or more HB or more

< Material report >SampleName: Resin for FRP[G-689S(Y)(UP-G)]

Test item Unit Sample Category Results Test method
Exterior – – No abnormality KS M 3305 : 2009
Density g/mL – 1.116 KS M 3305 : 2009
Acid value (part acid value) KOH – 24.3 KS M 3305 : 2009
mg/g
Viscosity(25 ± 1)℃) mPa.s – 314 KS M 3305 : 2009(*)
room temperature gelling time min – 17.9 KS M 3305 : 2009(**)

* Bookfield Viscometer, LV2, 30 r/min / ** Mixing ratio = main material : hardener = 100 : 1 (volume ratio)

Supply Ability

  • Process : Hand Lay-up → Sanding → Painting → Assembly
  • Lead Time : 4 days

Packing & Delivery

  • Packaging Details : 30kgs
Hood Hood 75_2 Crashpad